8.1/2" x .090" Tip 90° Bent Circlip Pliers Online

Circlip Pliers 8.1/2" x .090" Tip 90° Bent T&E Tools 149-90

Calculate Shipping

T&E Tools 149-90 8.1/2" x .090" Tip 90° Bent Circlip Pliers

Description

8.1/2" x .090" Tip 90° Bent Circlip Pliers T&E Tools 149-90

These heavy-duty pliers eliminate the need for separate internal and external tools. By adjusting the central pivot screw, you can switch operations to either compress an internal circlip inside a bore or expand an external circlip over a shaft. The machine-formed tips provide a secure grip to prevent snap rings from slipping off under tension.

Tip Size 8.3/4"

Length 8.3/4"(225mm)

Tool Type: Convertible internal/external circlip (snap ring) pliers.
Tip Configuration: 90° angled bent tip with a precise, machine-formed .090" (2.3mm) tip size.
Overall Length: 8.3/4 inches (225mm).
Conversion Mechanism: Converts easily from internal to external configuration by simply repositioning the centre pivot screw

Warranty

T&E Tools manufactures and markets Professional Hand Tools, Specialty Service Tools and Workshop Equipment all to represent quality and value as a matter of policy. All T&E Tools are engineered and manufactured to the highest quality standards and are warranted to be free of defects in workmanship and materials. Any T&E Hand Tool, Speciality Service Tool or any piece of Workshop Equipment, which fails during its normal useful life to perform satisfactorily, will be repaired or replaced at no charge. This warranty does not extend to altered, abused, badly worn product, or an item used for a purpose other than for which it was intended. T&E Tools Pty. Ltd. is not liable for incidental or consequential costs or losses incurred by the product, purchaser or user. Items such as pullers can be subjected to high torque loads. They require sufficient lubrication to forcing screw threads to prevent binding. Torque wrenches or multipliers that are found to be defective in material or workmanship must be returned to the T&E Tools repair centre, for evaluation before any repair or replacement is given. T&E Tools Pty. Ltd. reserves the right to repair or replace product, if a defect in material or workmanship is found. Many speciality tools are designed in a manner that require usage as set out in the instructions supplied and care should be taken to insure the method of operation is followed correctly.