Buy Replacement Pliers For Item 4980 Online

Replacment Pliers For Item 4980 T&E Tools 4980-A

Calculate Shipping

T&E Tools 4980-A Replacement Pliers For Item 4980

Description

Replacment Pliers For Item 4980 T&E Tools

Available separately or as part of item '4980' Ring-O-Matic Piston Ring Compressor. Without taking the pliers off the band on which you are working, you can operate it from either vertical or horizontal positions.
Pliers have a fine ratchet mechanism which permits the bands to be contracted by minute graduations.
Length: 10.3/4" (275mm).
Also Available Separately

Item No.	Description	Size
4980-A	Pliers	Length: 10.3/4" (275mm)
4980-B	Band	2.7/8" to 3.1/8" (73 to 79mm) x 1.1/2" (38mm) Wide
4980-C	Band	3.1/8" to 3.3/8" (79 to 86mm) x 1.1/2" (38mm) Wide
4980-D	Band	3.3/8" to 3.5/8" (86 to 92mm) x 1.1/2" (38mm) Wide
4980-E	Band	3.5/8" to 3.7/8" (92 to 98mm) x 1.1/2" (38mm) Wide
4980-F	Band	3.7/8" to 4.1/8" (98 to 105mm) x 1.1/2" (38mm) Wide
4980-G	Band	4.1/8" to 4.3/8" (105 to 111mm) x 1.1/2" (38mm) Wide
4980-H	Band	4.1/2" to 4.3/4" (114 to 121mm) x 1.1/2" (38mm) Wide
4980-I	Band	4.3/4" to 5" (121 to 127mm) x 1.1/2" (38mm) Wide
4980-J	Band	5" to 5.1/4" (127 to 133mm) x 1.1/2" (38mm) Wide
4980-N	Band	5.1/4" to 5.1/2" (133 to 140mm) x 1.1/2" (38mm) Wide
4980-K	Band	5.1/2" to 5.3/4" (140 to 146mm) x 1.1/2" (38mm) Wide
4980-M	Band	5.3/4" to 6" (146 to 152mm) x 1.1/2" (38mm) Wide
4980-P	Band	4.3/8" to 4.1/2" (111 to 114mm) x 1.1/2" (38mm) Wide

Warranty

T&E Tools manufactures and markets Professional Hand Tools, Specialty Service Tools and Workshop Equipment all to represent quality and value as a matter of policy. All T&E Tools are engineered and manufactured to the highest quality standards and are warranted to be free of defects in workmanship and materials. Any T&E Hand Tool, Speciality Service Tool or any piece of Workshop Equipment, which fails during its normal useful life to perform satisfactorily, will be repaired or replaced at no charge. This warranty does not extend to altered, abused, badly worn product, or an item used for a purpose other than for which it was intended. T&E Tools Pty. Ltd. is not liable for incidental or consequential costs or losses incurred by the product, purchaser or user. Items such as pullers can be subjected to high torque loads. They require sufficient lubrication to forcing screw threads to prevent binding. Torque wrenches or multipliers that are found to be defective in material or workmanship must be returned to the T&E Tools repair centre, for evaluation before any repair or replacement is given. T&E Tools Pty. Ltd. reserves the right to repair or replace product, if a defect in material or workmanship is found. Many speciality tools are designed in a manner that require usage as set out in the instructions supplied and care should be taken to insure the method of operation is followed correctly.